Using glass-fiber plastics for cooling tower became a rule in a world practice primarily owing to high durability of effects of a moisture and ultra-violet radiation. Their life cycle is more then 4-5 times greater in comparison with steel thus a construction does not require servicing.
The external polyester gelcoat can be produced in wide colour spectrum that gives to a cooling tower the good exterior improving industrial design of the factory.
Owing to a modular design and lightl weight, assembly can be carried out in the shortest periods that is important for reducing of shutdown of the cooler.

   Low specific gravity of glass fibre plastics reduces a structure weight nearly twice in comparison with metallic one;
   Besides incrustation on a plastic surface grows not so strongly. If nevertheless scurf emerged, it is easily deleted by water.


tack for VG-50 cooling tower



tack for VG-70 cooling tower

cooling tower VG-70

Fan stack inner diameter, m 5,04
Fan stack height, m:
Type-1 4,2
Type-2 3,1
Type-3 2,7
Number of sections of fan stack 12

Fan stack inner diameter, m 7,0
Fan stack height, m: 3.5
Weight of one section, kg <100
Weight, kg 1200
Number of sections of fan stack 20